Decorative Privacy Screens in St. George, UT
D.A.D.S. Construction builds custom decorative privacy screens for decks, patios and pergolas in St. George, blocking neighbors' sightlines, low afternoon sun and gusty wind while adding a finished architectural look. Each screen is anchored to structure, not just bolted to deck boards.
PRIVACY WITH STYLE
How Can I Add Privacy to My Deck or Patio in St. George?
Many St. George neighborhoods have homes close together, two-story houses that look straight down into the yard next door, and lots that face a busy street. A well-placed privacy screen turns an exposed deck into a space that feels like a private outdoor room, without walling it in completely.
Screens also solve problems that are specific to Southern Utah. On west-facing lots, a vertical panel can block the low late-afternoon sun that a roof cannot reach. On windy sites in Hurricane or open hillsides in Santa Clara, a slatted screen breaks up wind and blowing red dust while still letting air move through. Because a screen acts like a sail in a storm, we anchor posts into framing or footings and size them for wind load.
We build screens as part of a new deck or patio, add them to existing decks, or attach them to a pergola or louvered roof. Designs range from horizontal slats to decorative panels with integrated lighting that glow at night.
✓ Custom layouts placed exactly where you need privacy
✓ Posts anchored to framing or footings for wind load
✓ UV- and heat-resistant materials and finishes
✓ Optional integrated lighting for evening use
✓ Designs that work with HOA review requirements
30+ YEARS
St. George, UT
SCREEN STYLES
What Types of Privacy Screens Can You Build?
Every screen is built for its location: how much privacy you need, where the sun and wind come from, and what style matches your home. These are the most common options we build for Washington County homeowners.
Horizontal Slat Screens
A clean, modern look that suits desert contemporary homes. Slat spacing can be tightened for full privacy or opened up to let breezes through.
Decorative Panel Screens
Patterned panels create a focal point on the deck and cast interesting shadows. Paired with lighting, they become a feature after dark.
Pergola Side Panels
Adding screens to one or two sides of a pergola or louvered roof blocks low sun and wind while keeping the other sides open to the view.
Freestanding Privacy Walls
For patios or hot tub areas, a freestanding wall on concrete footings creates a private zone without attaching anything to the house.
Screen & Railing Combos
On raised decks we can blend a taller privacy section into the railing line so one side is screened and the rest stays open to red rock views.
Lighted Screens
Low-voltage lighting built into posts or behind panels gives a soft evening glow, with wiring planned and concealed during construction.
Why Add a Decorative Privacy Screen?
A privacy screen is one of the simplest ways to make a deck or patio more comfortable and more usable in the Southern Utah climate.
01
Real Backyard Privacy
Block direct views from neighboring windows and the street so the deck feels like part of your home.
02
Afternoon Sun Control
A vertical screen stops low western sun that a roof alone cannot, keeping seating usable later in the day.
03
Wind & Dust Break
Slatted designs slow gusts and blowing dust without trapping heat the way a solid wall would.
04
Finished Architectural Look
Screens frame the deck, hide utility areas and add a custom design element that photographs well.
05
Built to Stay Put
Posts tie into structure with corrosion-resistant hardware, so screens stay plumb through monsoon winds.
06
HOA-Friendly Design
Clear drawings and material samples make HOA design review simpler in communities that require it.
VETERAN OWNED
How it works
A Veteran-Owned Team That Sweats the Details
D.A.D.S. Construction is veteran-owned and operated, with more than 30 years of building experience. We are a small, detail-focused team, so the people who measure your deck are the same people who build the screen. That means straight lines, even spacing and hardware that is hidden and protected.
We build privacy screens throughout St. George, Washington City and Ivins. If you can dream it, we can build it. Contact us for a free estimate.
How tall should a privacy screen be on a St. George deck?
Most deck privacy screens are sized to block the view from a seated position, which usually means the panel top sits above eye level when you are sitting down. The right height depends on deck elevation, neighbor sight lines, wind exposure and any HOA limits, so we measure from your actual seating spots.
How do you find the right placement?
We sit where you will sit. From there we check which windows, walkways or streets can see in, and where the low western sun hits in late afternoon. A screen placed only where it is needed keeps the deck open and airy elsewhere.
On raised decks the sight lines change, because you are looking over fences instead of at them. That is common on two-story homes in St. George and on sloped lots in Santa Clara and Leeds.
What should I think about before choosing a design?
- Which direction needs blocking: a neighbor, the street or the afternoon sun
- Whether you want full privacy or a softer, filtered view
- How much breeze you want to keep moving across the deck
- Whether the screen should match your railing or pergola
- Whether you want lighting built into the panels
How is a privacy screen installed?
- We visit, check sight lines and wind exposure and confirm any HOA requirements.
- You approve a layout, panel style and finish with the timeline shared up front.
- Posts are anchored into the deck framing or new footings with added blocking where needed.
- Panels or slats are installed level with consistent spacing.
- Any lighting is wired and concealed, and we walk the finished screen with you.
Slatted screen or solid panel: which works better in Southern Utah wind?
Slatted and decorative cut panels let some air pass through, which reduces the wind load on posts and keeps heat from building up behind the screen. Solid panels give total privacy but act like a sail in strong gusts, so they need heavier posts and anchoring. Many homeowners combine both.
How do the main screen types compare?
- Horizontal slats: modern look, adjustable gap for privacy versus airflow.
- Decorative cut panels: pattern and filtered light, a strong design feature at night when lit.
- Solid panels: maximum privacy and sun block, highest wind load.
- Screens combined with railing: privacy only in the sections that need it while the rest stays open.
Will a screen stand up to monsoon winds?
It will when the posts are tied into solid structure. We fasten posts with corrosion-resistant hardware and add framing where needed, so screens stay plumb through spring winds in Hurricane and summer monsoon storms across Washington County.
Can a screen hide pool equipment or AC units?
Yes. Short freestanding screens are a clean way to hide pool pumps, trash bins or air conditioning units. We leave enough airflow and service access so the equipment keeps running properly.
Can a screen be added to an existing deck?
Often yes. We check the framing first, because the posts have to connect to something strong. Screens can also be paired with a new railing system or set along the open side of a louvered roof to block low sun.
Who installs privacy screens near me?
D.A.D.S. Construction is a veteran-owned, licensed and insured builder with 30+ years of experience serving St. George, Ivins and nearby towns. See our full list of services for related outdoor projects.
Ready to plan your project? You can request a free estimate online or call (435) 301-8298. If you can dream it, we can build it.
Common questions
Frequently Asked Questions
Common questions about adding decorative privacy screens to decks and patios in St. George.
Can a privacy screen be added to my existing deck?
Usually, yes. We check that the deck framing can accept new posts and that the structure is sound. Posts are through-bolted to joists or rim boards, or set on their own footings, rather than screwed into deck boards. If the deck needs reinforcement first, we explain why before any work starts.
How do privacy screens handle St. George wind?
A solid screen catches wind like a sail, so we size posts and anchors for the exposure and often use spaced slats that let air pass through. On windy sites such as open hillsides or parts of Hurricane, we may recommend shorter spans or extra posts to keep everything rigid.
What materials do you use for privacy screens?
We choose materials that resist UV, heat and moisture, such as composite, coated metal or properly finished wood, depending on the look you want and the upkeep you prefer. During the estimate we show options and explain how each one ages in the Southern Utah sun.
Will my HOA allow a privacy screen?
Many HOAs allow screens but have rules on height, color and placement. We provide drawings, dimensions and material details you can submit for design review, and we adjust the design if the HOA asks for changes. Approval should be in hand before construction begins.
Can you add lighting to a privacy screen?
Yes. Low-voltage lights can be built into posts, caps or behind decorative panels to light the deck at night. Planning lighting during design lets us hide the wiring inside the structure instead of running it along the surface, which looks cleaner and lasts longer.
How tall can a deck privacy screen be?
Height depends on local code, HOA rules, wind exposure and what you need to block. Most screens are tall enough to cover seated and standing sightlines. We measure from your seating area to the neighbor's view lines and recommend the height that solves the problem without overbuilding.
